Wipe each exhaust outlet with a clean microfiber cloth to remove soot, carbon buildup, and debris. A clean surface ensures the tip seats flush and the clamp grips evenly.

Before securing, slide each tip over its corresponding exhaust outlet without tightening. Confirm depth and alignment relative to the bumper cutout. Familiarize yourself with the correct position.

Slide the tip to the correct installed depth and check that the tip face is parallel to the bumper diffuser. Adjust angle as needed before clamping.

Using a 10mm socket or wrench, tighten the clamp hardware until the tip is firmly held. Snug — not overtightened. Over-torquing can deform the stainless inner sleeve.

Follow the same process for all four tips. Check that gap spacing at the bumper cutout is consistent across the set for a symmetrical, factory-quality appearance.

Start the engine and let it idle for 60 seconds. Check that no tip has shifted. If movement is detected, re-tighten the clamp. Installation is complete.