1-949-229-3397 Irvine, CA Mon–Fri 10AM–5PM PST
Book Install Contact Us
Live
Free Shipping Over $400 OEM+ Quality Guaranteed Irvine, CA · Mon–Fri 10AM–5PM PST BMW · Euro · Supra Specialists Free Shipping Over $400 OEM+ Quality Guaranteed Irvine, CA · Mon–Fri 10AM–5PM PST BMW · Euro · Supra Specialists
Shop New Arrivals
Login

Country
1 / 9

PSM Style High Kick Carbon Fiber Trunk Spoiler - BMW F87 M2 & F22 2 Series

Elevate the look of your BMW F87 M2 or F22 2 Series with the PSM Style High Kick Carbon Fiber Trunk Spoiler from Bimmer Plug, designed for maximum visual impact and aerodynamic performance. Made from premium carbon fiber, this high-kick spoiler enhances downforce while adding an aggressive, track-inspired edge to your ride. Tailored specifically for the F87 M2 and F22 2 Series, it offers a flawless fit and easy installation.

$299.99
$350.00 14% OFF
5.0 (4 reviews)

Save $50.01 • Limited Time Offer

Premium Quality Parts
OEM-Grade Performance
5.0/5 Rating
4 verified reviews
Expert Support
BMW Specialists Available 24/7

Trusted by 30,000+ BMW Owners

Join thousands of satisfied enthusiasts who trust us for their upgrades.

Payment Options

Bimmer Plug Guarantees

UV Protected

UV Protected

Bimmer Plug Warranty

Bolt-On Ready

Bolt-On Ready

Expert Support

Expert Support

45-60 Min Install

45-60 Min Install

30-Day Returns

30-Day Returns

Genuine 2x2 Twill Weave Carbon Fiber Construction
PSM Style High Kick Profile for Maximum Rear Visual Impact
UV-Protective Gloss Clear Coat — Fade and Oxidation Resistant
OEM Mounting Point Integration — No Cutting or Drilling
Moderate Bolt-On Installation 45-60 Minutes — Reversible
Precision Fitment for BMW F87 M2 and F22 2-Series (2014-2021)
Significantly Lighter Than OEM Plastic Spoiler
Zero Chassis Coding Required

SPECIFICATION & COMPATIBILITY

Will it fit my exact car?

Verify compatibility with your vehicle

Fitment Database

Verified compatibility matrix

Year Range Model Chassis Code Notes
2016-2021 F87 M2 F87 Direct OEM mounting point fit
2014-2021 F22 2-Series Coupe F22 All variants — 220i through M240i

Installation Protocol

Step-by-step procedure

Professional Installation Recommended

While DIY installation is possible with mechanical knowledge, professional installation is recommended for optimal results and to avoid potential fitment issues.

Book Professional Installation
01

Wash trunk lid with soap and water, dry fully, then wipe OEM mounting point areas with alcohol prep wipes. Allow 30 seconds to evaporate.

02

Unbolt OEM trunk spoiler or trim piece using 10mm socket. Retain all original hardware for potential reinstallation.

03

Dry-fit the PSM High Kick spoiler to OEM mounting points without fastening. Confirm edge alignment and gap consistency across full width.

04

With a helper holding the spoiler in position, hand-thread OEM mounting fasteners through the carbon spoiler mounting tabs.

05

Before torquing, confirm flush fit at all edges, lateral symmetry, and consistent panel gap. Adjust as needed while fasteners are still hand-loose.

06

Torque all mounting fasteners to OEM specification using 10mm socket. Do not overtighten — carbon fiber mounting tabs require controlled torque.

07

Inspect all panel gaps and spoiler stability. Clean surface with microfiber cloth. Installation complete.

What You Should Know Before Installing

Our product is engineered for simplicity. No special tools, no expertise required. Just straightforward installation that takes minutes.

Time 45-60 Minutes
Reversible Yes, fully
Watch Installation
CARBON FIBER SPOILER COMPARISON

OEMVSBIMMER PLUG

PSM High Kick Carbon vs. OEM Trunk Lid Spoiler

Material
ABS Plastic vs 2x2 Twill Carbon
Warranty
Standard OEM Coverage vs Manufacturer's Warranty — contact support
Finish Options
Body Color Paint vs Gloss Carbon Fiber

Qualitative assessments — not lab results.

Visual Impact
55
92
Build Quality
72
88
Fitment Precision
95
90
Motorsport Styling
45
95
PSM Style Carbon Fiber Trunk Spoiler - BMW F87 M2 | F22 / F23 2 Series
SPECIFICATION
OEM STANDARD
BIMMER PLUG PSM CARBON
01

Material Construction

Injection-molded ABS plastic

2x2 twill weave carbon fiber

02

Design Philosophy

Conservative factory aesthetic

PSM high-kick motorsport profile

03

Installation Process

Factory-installed, OEM hardware

Moderate bolt-on, 45-60 min, reversible

04

Fitment Engineering

Factory precision, OEM spec

Engineered to OEM mounting points

05

Surface Finish & Protection

Body-matched paint, no UV coat

Multi-layer UV gloss clear coat

06

Warranty Coverage

Standard BMW OEM coverage

Manufacturer's Warranty — contact support

07

Customization Options

Body color only

Gloss carbon, distinct visual identity

08

Weight Reduction

Standard ABS weight

Lighter carbon fiber construction

09

Build Quality

OEM production standard

Hand-finished, inspected carbon

10

Installation Support

Dealer installation only

DIY guide + tech support available

BUILD TRANSPARENCY

Every detail. Measured, verified, and documented.

From material selection to final fitment validation, each stage is engineered to preserve OEM refinement.

3 quality gates
OEM+ integration standard
Human Tested before dispatch
Learn About Our Process
01

Authentic Carbon Fiber Construction

Every Bimmer Plug carbon fiber component begins with genuine 2x2 twill weave carbon fiber fabric — not fiberglass reinforced with a carbon film overlay. The carbon is layered and resin-infused under controlled conditions to produce a void-free shell with consistent wall thickness and structural integrity. Each spoiler undergoes visual inspection for weave alignment, surface finish consistency, and edge definition before it leaves our fulfillment process. You receive a component that represents authentic carbon fiber craftsmanship — not an imitation that fades, flexes, or loses structural definition under real-world use.

Explore Standard
02 / CRAFT DETAIL

Precision Fitment Engineering

The PSM Style High Kick Trunk Spoiler is dimensionally engineered to align with the BMW F87 M2 and F22 2-Series trunk lid geometry — including OEM mounting point spacing, trailing edge curvature, and lateral profile. Fitment precision is validated against factory trunk lid contours to ensure flush panel alignment with zero gap inconsistencies at any edge. The spoiler does not require shimming, bending, or improvised mounting to achieve a factory-integrated appearance. Precision fitment is not a marketing claim — it is an engineering requirement that Bimmer Plug builds into every carbon fiber component before it reaches a customer's vehicle.

Explore Standard
03 / VALIDATION

Quality Assurance and Warranty Coverage

Each Bimmer Plug carbon fiber spoiler is inspected for surface defects, weave consistency, clear coat adhesion, and structural integrity before shipment. Our quality process is designed to catch delamination, surface voids, and finish irregularities at the source — not after the product reaches your door. In the unlikely event your component arrives with a manufacturing defect, Bimmer Plug's support team is available to assess and resolve the issue directly. Manufacturer's Warranty applies — contact support for full coverage details. Reach us at support@bimmerplug.com or +1 (949) 229-3397 for any warranty or order inquiries.

Explore Standard

Features & Specifications

01 Premium

Real Carbon Fiber — Not A Compromise

This spoiler is constructed from authentic 2x2 twill weave carbon fiber — not ABS plastic with carbon film wrap. The result is a razor-sharp weave pattern, structural rigidity, and genuine weight reduction that only real carbon fiber delivers. Every panel is hand-finished and inspected before shipment to ensure the visual quality meets Bimmer Plug standards.

02 Verified

PSM High Kick Profile — Instantly Recognized

The PSM Dynamic-inspired high-kick geometry fundamentally reshapes the rear visual profile of the F87 M2 and F22 2-Series. The elevated trailing edge creates a competition-ready, purposeful stance that distinguishes your build from factory specification. This is not a subtle upgrade — it is a statement piece for enthusiasts who mean business.

03 Precision

UV-Protective Clear Coat — Built to Last

A multi-stage UV-protective gloss clear coat is applied over the carbon weave to prevent the yellowing, hazing, and surface degradation that affects unprotected carbon fiber exposed to sunlight and weather. Your spoiler maintains its deep gloss and crisp weave definition through years of year-round use — no additional sealing required.

04 Complete

OEM-Point Mounting — Clean and Reversible

Engineered to integrate directly with the existing BMW F87 M2 and F22 2-Series trunk lid mounting hardware. No cutting, no drilling, no permanent modifications. Installation is a moderate DIY task achievable in 45-60 minutes using basic hand tools. Fully reversible — remove it and return to OEM configuration at any time without a trace.

Bimmer Plug · Quality Promise

Upgrade With Confidence: Premium Mods, Backed by Pros

You’re not just buying parts — you’re tapping into expert support, exclusive resources, and member bonuses that turn every mod into a premium experience.

Our Guarantees

01

Premium Warranty Coverage

Comprehensive coverage protecting your investment against manufacturing defects and performance failures. Quality backed by our commitment.

02

Guaranteed Fitment

Perfect fit for your exact model and year. Free VIN check and install guidance included with every order.

03

Protected Purchase Policy

Defective or damaged items replaced immediately. Unopened items eligible for return within policy guidelines.

04

100% Authentic Guarantee

Verified authentic parts from authorized manufacturers. Every item includes traceable documentation for genuine quality.

Fast Shipping — Ships within Our Shipping timeline for out of stock items is: 2-4 Weeks business days

Policy Overview

Our Commitment to You

Return Policy

30-Day Return Policy

Easy returns within 30 days of delivery

Return Policy: 30 Day Return Policy all items; has to be approved by Bimmer Plug for valid reason.
  • Items must be unused, uninstalled, and in original packaging
  • Custom or special-order products are non-returnable unless defective
  • Return authorization required before shipping
  • Approved refunds processed within 5–7 business days
Customer Support

Expert Customer Support

Monday-Friday, 10am-5pm PST

Customer Support +1 (949) 229-3397 Text or Call in (Sales + Customer/Order Support) support@bimmerplug.com +1 (949) 207-9246 Text in only (Technical Support/Installation)
support@bimmerplug.com Email +1(949) 229-3397 Customer Support +1 (949) 207-9146 Technical Support
Trusted by 20,000+ car owners

What Our Customers Say

4.9 out of 5 stars from over 3,500 reviews

See Customer Builds

CUSTOMIZE IT YOUR WAY

BUILD YOUR KIT

Select your model, then browse categories to pick parts for your build.

STEP 1 — SELECT BRAND

Support

Frequently Asked Questions

Find clear answers about fitment, installation, and what to expect before you place an order.

Fast Answers No Guesswork

LOGISTICS

Installation & Pickup

Choose the installation method that works best for you. Whether you prefer DIY, professional installation, or local pickup, we provide flexible options designed around your schedule and expertise level.

PSM Style Carbon Fiber Trunk Spoiler - BMW F87 M2 | F22 / F23 2 Series
01

Self Installation

Perfect for DIY enthusiasts who prefer hands-on experience

✓ Installs in 45-60 Minutes
✓ Professional Installation Required
✓ Yes, fully reversible
02

Professional Installation

Expert certified technicians at your service

✓Compatible with BMW specialists
✓No coding required
✓Quick service appointment
Local Pickup
03

Local Pickup

Convenient pickup at your preferred location

✓Available at select locations
✓Contact support to arrange
✓Immediate availability

Professional Installation Services

Our network of certified BMW specialists provides expert installation services across multiple locations. Each technician is trained on our products and follows manufacturer-recommended installation procedures to ensure optimal performance and warranty compliance.

✓

Same-day and next-day appointments available

Flexible scheduling to fit your busy lifestyle

✓

Competitive labor rates and transparent pricing

No hidden fees or unexpected charges

✓

OEM-approved tools and diagnostic equipment

Precision installation using the same tools trusted by dealerships

✓

Post-installation inspection and performance verification

Every install is tested and reviewed to ensure proper fit, function, and system integrity

✓

Installation warranty included with service

Peace of mind with comprehensive warranty coverage

Ready to Get Started?

View our complete installation services and pricing options

VIEW INSTALLATION SERVICES & PRICING

Need help deciding? Contact our team for personalized recommendations.