Wash the shark fin antenna with soap and water, dry completely, then wipe with the included alcohol prep pad. Allow 30 seconds to evaporate before proceeding.

Hold the carbon fiber cover over the antenna with the backing still on. Confirm it sits flush and aligns correctly. Familiarize yourself with the exact position before committing.

Remove the red protective film from the pre-applied 3M automotive-grade tape. Avoid touching the exposed adhesive surface with your fingers.

Starting from the rear edge, align the cover and press down firmly for 30 seconds. Apply even pressure across the entire surface including edges and curves.

Wait 24 hours before washing the vehicle or exposing it to rain. After full cure, the bond is permanent and weather-resistant under normal driving conditions.