MP Style Carbon Fiber Dual Exhaust Tip

Enhance the rear end of your BMW with our MP Style carbon fiber dual exhaust tips!

Even the smallest detail has an impact to tie together your whole build. This exhaust tip highlights your rear end using a carbon fiber sleeve around the stainless-steel tip. The carbon fiber finisher surrounds the laser-inscribed BP logo for a futuristic touch.

This product is custom-made to order. Please allow 1-3 weeks for production and 1-2 weeks for delivery.

Please note that custom-made products cannot be exchanged or returned.

Includes One (1) MP Style carbon fiber exhaust tip.

• Adjustable clamps & 250mm length.
• Bolt-on installation.
• Made with genuine dry carbon fiber.
• 2x2 carbon fiber weave.
• Designed by Bimmer Plug in California.

• Glossy UV protectant clear coat is pre-applied, to consider for sun damage and external factors.
• Tools necessary for the inlet adjustment are provided, for ease of installation.
• Ships from California, USA.

63mm (Stock Exhaust):

• 2015-2016 F22 | F23 BMW 2 Series.
• 2012-2018 F30 | F31 BMW 3 Series.
• 2014-2020 F32 | F33 | F36 BMW 4 Series.

67mm (MP Style Exhaust):

• 2015-2016 F22 | F23 BMW 2 Series.
• 2012-2018 F30 | F31 BMW 3 Series.
• 2014-2020 F32 | F33 | F36 BMW 4 Series.

70mm:

• F87 BMW M2 (2016-2021).
• F80 BMW M3 (2014-2018).
• F82/F83 BMW M4 (2014-2020).
• F10 M5 BMW (2011-2016).
• F12/F13/F06 BMW M6 (2012-2018).

76mm:

• F90 M5 (2018-present).

80mm:

• G80 BMW M3 (2021-present).
• G82 BMW M4 (2021-present).

The exhaust tip's metal is made of 304 stainless steels for maximum durability and anti-rust protection. The exhaust tips are coated with a high gloss heat/UV protectant clear coat for shine and protection. Our exhaust tips can be clamped or welded on.

We highly recommend keeping your exhaust tip inlet size in mind so the tips will be a perfect fit when it arrives. For perfect fitment with no issues, please measure your inlet diameter; it will be the inlet size you select for your exhaust tip. Please email us if you need fitment help or want to check availability on a specific inlet size.

In order to measure the correct inlet size for your specific exhaust setup, please measure the inlet diameter of the piping, which is directly behind your exhaust tip. This is because our exhaust tips will go over your exhaust piping and can be clamped or welded on. For example, if you measured your inlet diameter to be 66mm inlet, you may choose our 67mm inlet option, as once it is clamped down with our adjustable clamps, it will fit your 66mm inlet exhaust piping.

If you are looking for custom finishes on the carbon (matte carbon, etc.) & etching/engraving on the exhaust tip, please get in touch with us.

Note: 

The "BP logo" is lasered on the exhaust tip. If you would like any unique lasering or no logo, please leave a note on your order.