PREMIUM WARRANTY COVERAGE
Comprehensive coverage protecting your investment against manufacturing defects and performance failures.
Product Preview
Part Details & Configuration
V Style Carbon Fiber Front Grilles
BMW G80 M3 & G82/G83 M4
Transform the front-end of your BMW G80 M3 or G82/G83 M4 with the V Style Carbon Fiber Front Grilles from Bimmer Plug. These grilles add an aggressive, race-inspired look to your vehicle, combining high-performance aesthetics with premium craftsmanship. Made from high-quality carbon fiber, they offer a perfect blend of lightweight durability and a precise fit.
• Genuine 2x2 twill carbon fiber construction
• V-Style aggressive front profile
• Direct OEM fit, no cutting or modifications
• UV-resistant gloss clear coat finish
Please enter your vehicle information before continuing.
Find Your Perfect Fit
Select your BMW model and year to instantly verify compatibility for your V Style Carbon Fiber Front Grilles.
| Year Range | Model | Chassis | ACC Notes |
|---|---|---|---|
| 2021–Present | G80 M3 | G80 | All variants including Competition and CS |
| 2021–Present | G82 M4 Coupe | G82 | All variants including Competition, xDrive, and CSL |
| 2021–Present | G83 M4 Convertible | G83 | All variants |
Don't see your model?
If your vehicle isn't listed, contact our support team for confirmation.
Contact Support
What Happens During Installation?
Follow these seven straightforward steps to install your V Style Carbon Fiber Front Grilles with confidence. No guesswork, just a clear, guided process.
Preparation & Safety
Park on a flat surface, set the parking brake, and raise the front end. Disconnect the negative battery terminal (optional but recommended when working near sensors).
Step 1
Step 2
Remove Bumper Under-Tray & Wheel-Arch Screws
Under-tray: Use a T25 Torx to remove the 8 perimeter screws and set the panel aside. Wheel-arches: Turn the wheels full lock, then remove three 8 mm screws on each inner fender that secure the bumper corners.
Remove Top Bumper Bolts & Release Clips
Pop the hood. With a T30 Torx, remove the six upper carrier bolts. Gently release the two plastic alignment clips by pulling upward.
Step 3
Step 4
Disconnect Cameras & Sensors
Unplug the front camera (if equipped) and ACC sensor harness. Press the tab and pull—never yank the wires.
Remove the Bumper
Have a helper support one corner. Pull the bumper straight forward; the side spats will pop off the guide pins. Lay the bumper face-down on a blanket.
Step 5
Step 6
Remove the OEM Grille
Locate the 14 small plastic tabs around the grille perimeter. Using a trim tool or flat-head, depress each tab while pushing the grille outward. Transfer the camera bracket and ACC badge to the CSL grille using the same screws.
Install the Bimmer Plug Carbon Fiber Grille
Align the new grille with the bumper opening, starting with the lower tabs. Press firmly until each tab clicks into place. Double-check all clips are fully seated.
Step 7
Step 8
Re-install Bumper
Slide the bumper back onto the guide pins under the headlights. Reconnect all wiring harnesses. Reinstall the six upper bolts, wheel-arch screws, and under-tray panel. Torque to OEM spec (6 Nm for Torx screws, 10 Nm for carrier bolts).
Final Checks
Lower the car and run a quick sensor calibration if iDrive prompts you. Visually inspect panel gaps and ensure the grille sits flush.
Step 9
Installation Protocol
Prefer it done for you?
While DIY installation is possible with mechanical knowledge, professional installation is recommended for optimal results and to avoid potential fitment issues.
While DIY installation is possible with mechanical knowledge, professional installation is recommended for optimal results and to avoid potential fitment issues.
Certified Installers. Guaranteed Work
Backed byQuality
You're not just buying premium BMW parts. You're investing in expert support, trusted quality, and a seamless upgrade experience from purchase to installation.
GUARANTEED FITMENT
Perfect fit for your exact model and year. Free VIN check and install guidance included with every order
PROTECTED PURCHASE
Defective or damaged items replaced immediately. Unopened items eligible for return within policy guidelines
100% AUTHENTIC GUARANTEE
Verified authentic parts from authorized manufacturers, with traceable documentation for genuine quality.
Engineered for Performance. Built to Last.
Every specification reflects our commitment to OEM-grade engineering, from genuine carbon fiber to precision chassis fitment. Each grille delivers a motorsport-inspired upgrade over factory parts.
Every specification reflects our commitment to OEM-grade engineering, from genuine carbon fiber to precision chassis fitment. Each grille delivers a motorsport-inspired upgrade over factory parts.
Genuine Carbon
Genuine Carbon Construction
Every grille is crafted from real 2x2 twill weave carbon fiber, not wrapped plastic, visually superior and noticeably lighter overall.
V-Style Design
V-Style Aggressive Profile
The V-shaped geometry gives the kidney grille a sharper, forward-aggressive look, taking your front end from stock to track-spec.
Zero-Mod Fit
Zero-Modification OEM Fit
No cutting or drilling. Mounts directly into the factory surround using OEM attachment points and is fully reversible.
Weather Ready
UV-Resistant Gloss Finish
A multi-layer UV-resistant clear coat seals the carbon weave against sun fade, oxidation, and weathering, holding its depth and clarity over time.
Material
Material Construction
Genuine 2x2 twill carbon fiber construction, versus the standard OEM ABS plastic insert that it directly replaces on your BMW.
Design Philosophy
Conservative factory profile
Aggressive V-style track-inspired aesthetic, versus the factory's conservative closed profile design found on every stock G-chassis M car today still.
Installation
Installation Process
A 45 to 60 minute DIY install, no coding, no cutting, fully reversible, versus dealer-only installation for factory OEM parts.
Fitment
Fitment Engineering
Chassis-specific fit engineered exclusively for the G80, G82, and G83 models, versus the generic factory OEM mounting point tolerances overall.
Recommended For Your BMW.
Complete your upgrade with premium OEM+ accessories selected to complement your V Style Front Grilles. Every recommendation is tested for compatibility, easy installation, and factory quality integration.
Popular
BMW G80 M3 & G82/G83 M4
CSL Style Carbon Fiber FrontGrilles
Motorsport inspired split styling for a bolder, more distinctive front fascia.
BOLT-ON
OEM FIT
CARBON FIBER
View Details
BMW G80 M3 & G82/G83 M4
AN Style Carbon Fiber Front Grilles
Enhance the front-end presence of your BMW with the AN Style Carbon Fiber Front Grilles.
BOLT-ON
OEM FIT
CARBON FIBER
View Details
BMW F Chassis
BP Lowering Spring Kit
Progressive-rate lowering springs that drop ride height and sharpen cornering response instantly.
OEM FIT
ALCANTARA GRIP
ALCANTARA GRIP
View Details
BMW G90 M5 Style
Full Custom Steering Wheel
Hand-built Alcantara and leather wheel delivering motorsport grip with true OEM-style fitment.
ALCANTARA GRIP
OEM FIT
DIRECT PLUG-IN
View Details
BMW F80 M3, F82/F83 M4, & F87 M2C
Carbon Fiber Mirror Cap Set
Genuine dry carbon mirror caps adding lightweight, race-inspired styling to your BMW's exterior.
DRY CARBON
UV RESISTANT
DIRECT BOLT-ON
View Details
BMW G80 M3 & G82/G83 M4
ST Style Carbon Fiber Front Lip
Aerodynamic V-blade lip built from full carbon fiber for added downforce and stance.
ADDED DOWNFORCE
PRECISION FIT
FULL CARBON
View Details
BMW F Chassis
Forged Aluminum Wheel Spacer Kit
Hub-centric forged spacers that widen your stance while keeping wheels secure and centered.
HUB-CENTRIC
EXTENDED BOLTS
FORGED ALUMINUM
View Details
BMW G Chassis
M Style Carbon Fiber Mirror Cap Set
M-inspired carbon mirror caps offering track-ready styling with simple clip-on installation.
M STYLE
UV COATED
CLIP-ON FIT
View Details
BMW F80 M3 & F82/F83 M4
PSM Style Carbon Fiber Rear Diffuser
Multi-fin PSM-style diffuser enhancing rear downforce and completing your BMW’s aggressive stance.
HIGH-GLOSS CARBON
DIRECT FIT
MULTI-FIN DESIGN
View Details
BMW G80 M3 & G20 3 Series
PSM High Kick Carbon Fiber Trunk Spoiler
High Kick PSM spoiler boosting rear downforce with a bold, race-ready profile.
HIGH KICK
LIGHTWEIGHT CARBON
HARDWARE KIT
View Details
BMW F80 M3 & F30 3 Series
PSM Style High Kick Carbon Fiber Trunk Spoiler
Signature high kick spoiler delivering race-inspired rear styling and added stability.
Easy Install
UV Resistant
HIGH KICK
View Details
Real Drivers. Real Upgrades. Real Results.
From daily commuters to dedicated BMW enthusiasts, thousands of customers trust BimmerPlug for premium OEM+ upgrades, exceptional support, and factory-quality performance.
Ryan P.
Verified Purchase
Verified Purchase
The V-style profile makes a bigger difference than I expected. Fit was clean with no gaps, and the carbon looks great up close
★
★
★
★
★
Chris T.
Verified Purchase
Verified Purchase
Good value for the price point. Fitment was precise and the whole front end looks more aggressive now.
★
★
★
★
★
Daniel R.
Verified Purchase
Verified Purchase
Really happy with the gloss finish, it looks noticeably deeper than the factory plastic ever did.
★
★
★
★
★
Alex M.
Verified Purchase
Verified Purchase
Install took about an hour with basic tools. Clips lined up exactly like the guide described, no surprises.
★
★
★
★
★
Genuine 2x2 Carbon
Real twill weave, not wrapped plastic.
M3 & M4 Fitment
G80 • G82 • G83 Platforms
UV-Resistant Finish
Gloss clear coat resists fading.
Fully Reversible
Factory clips, no cutting.
45–60 Min Install
Basic tools, no coding.